Single-jet dry type vane wheel cold(hot) water meter

Direct reading on 8 numerical rolls and 1 index

Model:LXSC-13D~40D;LXSC/R-13D~40D　　　　　　　　　　　　　illustration

Application:
Measuring the volume of cold or hot potable water passing through the pipeline

Quality:
•Single jet meter, dry dial, small and light,magnetic drive, magnet resistance.
•Direct reading on 8 numerical rolls and 1 index,The counter can rotate 360 degrees for easy reading.
•5 reading rolls show cubic meters (1,000L) and, The last three red numbers show litres,
The single red hand on the lower dial rotates once per litre.
•Corrosion resistant brass body,available inlet strainer, low head loss etc.
•Plastic painted or nickel coated is available.
•Counter vacuum sealed, it does not get frosted for keeping long term clear reading.
•Available with protecting cover and pulse output upon customers' request.
•Brass male BSP unions supplied to each end for easy installation,
•Technical data conform to International Standard ISO4064 class B or R80

Working condition:
temperature:
≤40℃for cold water meter
≤90℃for hot water meter
Pressure:≤1.6Mpa

Maximum Permissible Error:
Qmin→Qt(ex Qt)=±5%;
Qt→Qs(both included)=±2% or ±3%(hot water)
Qmin=Min Flow, Qt=Transition Flow, Qs= Max Flow.